pH Controller HI8710 Hanna

Deskripsi

Jual pH Controller model HI8710 Hanna Instruments.

pH Controller Hanna Instrument. HI8710 adalah pH Controller yang mampu untuk mengendalikan kondisi pH Cairan. Alat ini memiliki kanal tunggal untuk mengendalikan dosing pump.

Kami PT. Alfa Omega Indolab merupakan distributor produk Hanna Instruments. Kami menjual produk Hanna dengan layanan prima sehingga memberikan jaminan pada pelanggan. Melayani pengiriman ke seluruh kota di Indonesia, sehingga banyak menjangkau customer. Berikut kota-kota yang kami layani : Jakarta, Bandung, Semarang, Yogyakarta, Surabaya, Medan, Denpasar, Kupang, Makasar, Manado, Jayapura, Pontianak, Samarinda, Lampung, Jambi, dll. Temukan produk-produk kami yang lain untuk melengkapi kebutuhan Laboratorium Anda. Berikut beberapa alat ukur penting untuk uji kualitas air : pH Meter, TDS Meter, DO Meter, Photometer, COD Meter, Turbidity Meter, Conductivity Meter, Salinity Meter, ORP Meter, ISE Meter, Refractometer, Thermometer, Chemical Test Kit, dll. Hanna Instrument fokus memproduksi alat ukur untuk kualitas air, sehingga sangat menjada mutu.

Fail Safe Alarm System

Hanna’s exclusive Fail Safe Alarm System protects against problems caused by power supply failure or signal interruption, which are typical risks in industrial environments. An alarm condition is indicated by a red LED, located directly on the front panel of the controller.

Overtime Dosing Protection

The pH Controller HI8710 Hanna Instruments incorporates adjustable overtime dosing protection from 5 to 60 minutes. If dosing exceeds selected time, the alarm will be triggered and the dosing contact will deactivate. This feature can be activated or deactivated.

Output and Input Connections

Each model accepts either a direct input from a pH or ORP electrode or from a transmitter through 4-20 mA input. The instrument also provides ±5V power output and input terminals for amplified electrodes. Moreover, you can choose the output configuration for connecting a recorder or a PLC, between 0-20 or 4-20 mA.

Self-Diagnostic Test

Memiliki fitur Built-in autodiagnostic, sehingga memudahkan user melakukan troubleshooting pada kerusakan.

Matching Pin Connection

Supports potential matching pin connection to avoid typical problems caused by grounding loop currents, such as progressive damage of the electrode, fluctuating measurements, and poor process regulation.

Robust Design

Memiliki desain yang sangat kuat, sehingga mampu bertahan dalam segala kondisi.

Specification of HI8710 pH Controller Hanna Instruments :

Specification Name	Detail
sku	HI8710
pH Range	0.00 to 14.00 pH
pH Resolution	0.01 pH
pH Accuracy (@20°C/68°F)	±0.02 pH (0 to 100 °C)/ ±0.05 pH (-20 to 0 °C) (electrode); ±0.5% (transmitter)
Temperature Compensation	Fixed or automatic with Pt100 from -20 to 100 °C (-4 to 212 °F)
Calibration	Offset: ±2 pH with OFFSET trimmer; Slope: 80 to 110% with SLOPE trimmer
Recorder Output	0-20 mA or 4-20 mA (isolated)
Analog Input	4 to 20 mA
Power Output	±5 Vcc; 150 mA max load for amplified electrodes
Setpoint Relay	1, isolated, 2 A, Max 240 V, resistive load, 1000000 strokes (not fuse protected)
Setpoint Range	0.2 to 3.00 pH
Backlight	Continuous ON
Dosing Control	OFF/AUTO/ON with selection switch
Over Dosing Control	Adjustable, from 5 min to 60 min with knob or Disable by wire strap – on rear panel
Power Supply	115 or 230 Vac; 60/50 Hz
Alarm Relay	1, isolated, 2 A, Max 240 V, resistive load, 1000000 strokes (not fuse protected)
Alarm Range	0.2 to 3.00 pH
Environment	$-10 to 50°C (14 to 122°F); RH max 95% non-condensing
Enclosure/ Case Material	Black anodized aluminium body; front and back with ABS; transparent splash-proof front cover
Dimensions	141 x 69 mm (5.6 x 2.7”)
Weight	kg (2.2 lb.)

HI8710 pH Controller Hanna Instruments

Download Catalog :

Deskripsi