Made for serious craft and hobby brewers, Hanna’s Brewing Thermometer is all you need to ensure that you get accurate temperature results throughout the entire brew process. Designed to withstand the knocks, drops, and spills of real life, the new IP65 body provides top performance while the extra long probe reaches deep into your brew kettle for reliable measurements. The included canvas case makes storage and transportation a cinch.
±0.1 °C/ ±0.2 °F accuracy
IP65-rated meter for durability on the brewery floor (included boot for even more protection!)
Extra long, stainless steel probe for extended immersion into tanks and kettles.
Not suitable for body temperature measurements.
CAL Check™ Feature
Hanna’s Brewing Thermometer includes our exclusive CAL Check™ technology. CAL Check™ reassures you that your meter is working at its best so that you can be confident in all of your results.
Long Battery Life
The included AAA batteries provide 4500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. If low battery power may affect your results, the meter will shut down to avoid poor readings caused by low battery level.
Automatic Shut-off
The auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on. The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or it can be disabled so that the meter continuously stays on.
Portable Design
Hanna’s Brewing Thermometer has been made to fit comfortably in your hand for on-the-go testing. A large LCD display provides at-a-glance readings from any angle and single button operation streamlines the testing process for any brewer.
Built to be Durable
Designed to withstand the knocks, drops, and spills of real life, the IP65 body and included boot offer increased protection for a durable thermometer than can handle any brewing environment. These meters are well protected against dust and water splashes from any direction.
Watertight Connection
A Quick DIN connector makes attaching and removing the probe simple and easy. The rubber coating protects the cable and creates a sealed connection for added reliability.
Supplied with 1m Stainless Steel Temperature Probe
The FC762N2 temperature probe is a rugged penetration probe measuring 1 meter in length. The stainless steel probe is both durable and easy to clean, the perfect combination to meet the tough environment encountered in breweries. Each probe is made extra long so that you can reach further into your tanks without compromising on safety or accuracy.
Completely Interchangeable Probes
Hanna’s Brewing Thermometer works with a wide range of thermistor probes, including an assortment of specially engineered FC762 probes, so you can get the right probe for your brewery.
Specification of HI935012 Thermometer Hanna Instruments :
Specification Name
Detail
sku
HI935012
Range
-20.0 to 120.0 °C -4.0 to 248.0 °F
Resolution
0.1 °C 0.1 °F
Accuracy (@20˚C/68˚F)
±0.1 °C (-20.0 to 120.0 °C) ±0.2 °F (-4.0 to 248.0 °F)
Probe
FC762N2
Probe Accuracy
±0.3 °C (-10.0 to 80.0 °C) ±0.5 °F (14 to 176 °F) ±0.7 °C / ±1.3 °F remaining range
Battery
1.5V AAA (3 pcs.) approx. 4500 hours of continuous use
Auto-Off
user selectable: after 8 min, 60 min or disabled
Environment
For product internal measurement: Rated operating condition: -20 to 50 °C (-4 to 122 °F) Limiting condition: -30 to 50 °C (-22 to 122 °F) Storage and transportation condition: -40 to 70 °C (-40 to 158 °F) Relative Humidity 100 %
Storage/transport temperature
-40 to 70 °C (-40 to 158 °F)
Dimensions
140 x 57 x 28 mm (5.5 x 2.2 x 1.1”)
Weight
175 g (6.17 oz.)
Case Ingress Protection Rating
IP65
Note
*The measurement range may be limited by probe type.
HI935012 Brewing Thermometer with 1m Stainless Steel Probe
Download Catalog :
Deskripsi
HI935012 Thermometer Hanna Instruments Hanna Instruments.
Made for serious craft and hobby brewers, Hanna’s Brewing Thermometer is all you need to ensure that you get accurate temperature results throughout the entire brew process. Designed to withstand the knocks, drops, and spills of real life, the new IP65 body provides top performance while the extra long probe reaches deep into your brew kettle for reliable measurements. The included canvas case makes storage and transportation a cinch.
CAL Check™ Feature
Hanna’s Brewing Thermometer includes our exclusive CAL Check™ technology. CAL Check™ reassures you that your meter is working at its best so that you can be confident in all of your results.
Long Battery Life
The included AAA batteries provide 4500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. If low battery power may affect your results, the meter will shut down to avoid poor readings caused by low battery level.
Automatic Shut-off
The auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on. The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or it can be disabled so that the meter continuously stays on.
Portable Design
Hanna’s Brewing Thermometer has been made to fit comfortably in your hand for on-the-go testing. A large LCD display provides at-a-glance readings from any angle and single button operation streamlines the testing process for any brewer.
Built to be Durable
Designed to withstand the knocks, drops, and spills of real life, the IP65 body and included boot offer increased protection for a durable thermometer than can handle any brewing environment. These meters are well protected against dust and water splashes from any direction.
Watertight Connection
A Quick DIN connector makes attaching and removing the probe simple and easy. The rubber coating protects the cable and creates a sealed connection for added reliability.
Supplied with 1m Stainless Steel Temperature Probe
The FC762N2 temperature probe is a rugged penetration probe measuring 1 meter in length. The stainless steel probe is both durable and easy to clean, the perfect combination to meet the tough environment encountered in breweries. Each probe is made extra long so that you can reach further into your tanks without compromising on safety or accuracy.
Completely Interchangeable Probes
Hanna’s Brewing Thermometer works with a wide range of thermistor probes, including an assortment of specially engineered FC762 probes, so you can get the right probe for your brewery.
Produk Terkait
HI151 Chektemp Thermometer Hanna Instruments
HI935008 Foodcare T-Type Thermocouple Thermometer with Fixed Probe
HI99556 Infrared and Contact Thermometer for the Food Industry